This
Agent
Name 561A
Viscosity 75000-82000cps
Appearance of white paste
Hard
Of
Agent Name 561B
Viscosity 55000-65000cps
Appearance of gray paste
Mix 1 1 (weight ratio)
Then the main purpose, repair, hand version of sculpture, electronic packaging, such as insulation
Main Features high strength, impact resistance, toughness -
Time can be used 100 g × 25 ℃ 30 minutes
Early hardening 4 hours
Hard
Of
Of
Special
Compressive strength of 395-428 (kg / cm 2)
Then intensity of 113 (kg / cm 2)
Flexural strength of 115 (kg / cm 2)
Heat-resistant 91 ℃
Hardness 87 (SHORED)
First, the use of methods:
1. 1 A were taken on the B-1 and mix and stir evenly.
2. AB will be in the coating mixture of adhesive surface.
3. Tu had adhesive bonding materials in at least 240 minutes in the transfer or moving to prohibit Otherwise, it will seriously affect bonding effect.
4. Tu had adhesive bonding items to be at least 12 hours after normal use, otherwise the adhesive curing effects and life will be affected.
Second, pay attention to matters:
1. A, B 2 to be stored in the shade, the two can not be stacked at the same time.
2. A, B 2 mixed as large, rapid curing dangerous, should be particularly careful.
5. Use, such as skin Dianfu the agent should be cleaned thoroughly with soap.
6. Coated tools or containers can not be mixed, so as not to cut short the life of.
Note: The product packaging is divided into 1 kg, 3kg and 5kg, A and B adhesive glue on 1:1 ratio and can be used after mixing uniformity,