Hypoxia is known as anaerobic adhesive plastic or screw fixation of belonging to a single type polymers products, mainly in the hypoxic environment curing, and oxygen exposure will not curing, in the confined environment of rapid solidification can be formed high intensity. mainly used in industrial production in the screw fixation, closed mechanical combination of pipe sealed bearings fixed, and so on, to extend machinery life, increase operational safety, improve product quality, with its strong anti-aging properties, resistance Temperature -55 ℃ ---- 160 ℃, is a superior performance of industrial adhesives.
First, physical parameters:
Products
No. viscosity (CPS) loose torque (N/mm2) friction torque (N/mm2) to fill the gap (mm)-Tension PSI PSI shear strength MIN completely fixed time HR flash intensity fires
ST-6100 800
± 10% 19.6 20 0.3 1800 --
2300 1900 --
2000 3 - 5 10 - 21150 ± 5 ℃
Second, the methods of operation and attention to matters:
⑴ first tooth profile interface, or degreasing decontamination, and dry to dry, clean and free of oil.
⑵ on-demand gap between the workpiece size, choice of glue to hypoxia (viscosity).
⑶ will hypoxia plastic coating on the front teeth (in plastic pipe size of change), the mother of teeth when tools can be locked.
⑷ locking can be about five minutes after the initial fixed period not to glue loose parts, otherwise they will be destroyed hypoxic plastic effectiveness.
⑸ hypoxia glue to cure completely for more than 24 hours, the best combination of good sized workpiece 24 hours after use, this effect will be even better.
⑹ To enable rapid completely curable adhesive hypoxia, please put on the plastic parts to high temperatures above 80 ℃.
⑺ large gap if the teeth of a workpiece or a lack of time, please join adequate iron oxide powder after mixing uniform coating.
⑻ fully securing the loose parts will be difficult to use high-temperature water vapour on Bonding site uniform heating or directly to the fire site uniform adhesive plastic softening after baking to be loosening.
⑼ this product can not be under the direct exposures to the sun, should be placed in a cool ventilated place.
⑽ used to decked prevent metal, dust and other polluting substances and thereby facilitate the storage period should be shortened.
⑾ contamination of the products, such as the skin, wash with soap suitable.
      ⑿ this product packaging: 1kg 250g 50g are available.